BMS HIL, RCP Solution : MDS테크

BMS(Battery Management Systems) 테스트를 위한 HIL 시뮬레이터

BMS HIL Simulator

dSPACE에서는 BMS(Battery Management System)를 테스트할 수 있는 HIL Simulator를 제공하고 있습니다. BMS에 연결되는 High-Voltage Battery를 Cell Level로 구현하고, 온도 센서, 전류 센서, FAN, EV 및 Hybrid 차량을 모델로 시뮬레이션 합니다. 이러한 BMS HIL Simulator를 통해 낮은 비용과 시간으로 BMS의 기능 검증, 셀 밸런싱, 온도, 고장 진단에 대한테스트를수행할수있습니다.

특징 Features

  • 확장 가능한 Cell Voltage 채널

  • Cell Voltage 출력 0~6 V

  • Cell Voltage 정확도 ±1 mV

  • Cell Current 출력 1 A

  • Pack Voltage 1000 V

  • 빠른 모델 샘플링 타임 (1 kHz 이상)

  • 온도 모사 (저항, 전압)

  • 고전압에 대비한 BMS 안전실

적용 분야 Application Areas

- 자동차 구동 모터

- ESS 시스템

- BMS HIL 테스트

- 고전압 배터리 시뮬레이션

- Multi Cell 시뮬레이션

- BMS 고장 시뮬레이션

- 다양한 타입의 배터리 시뮬레이션 (Pb, NiCd, NiMH, Li-ion)

BMS HIL TYPE

  • One rack system

  • Two rack system

  • Two rack system with external safety compartment

Battery Cell Voltage Emulation

BMS HIL 시뮬레이터의 주요 역할은 셀 전압과 온도를 높은 정밀도로 출력하는 것입니다.
이를 위해 특별히 제작된 EV1077 Battery Cell Voltage Emulation Board는 0~6 V, 1 A 출력으로 4개의 배터리 셀 전압을 모사할 수 있습니다. 또한 멀티 셀 배터리를 위해 EV1077 보드는 직렬로 연결이 가능하며, 최대 1000 V 팩 전압을 표현할 수 있습니다.

Battery voltage emulationUp to 200 cells
Output voltage0 ... 6 V
Resolution120 µV
Precision (across the working temperature range)±1 mV
Working temperature (environment)10 ... 50 °C (50 ... 122 °F)
Isolation- 60 V between the cells of a module
- 1000 V between the cells and the environment
ConnectionEthernet, e.g., as interface to SCALEXIO
Maximum update rate for all cells1 kHz
Fault simulation- Broken wire between ECU and battery
- Short circuits between cells
제 품문 의
top